Produktegruppe: Transmission & Distribution

24 – 220
Vdc
50 – 2’000
A
>4000
Realized installations

Rectifier / Battery Charging System

The latest development in Statron’s proven BDTe rectifier series sets new standards in durability, reliability, functionality and serviceability. The BDTe is a thyristor-controlled, high-performance rectifier designed for demanding environmental conditions in industrial applications such as oil and gas, petrochemical, power generation and distribution plants for worldwide use. The modular system concept combined with a large number of options makes it possible to meet virtually any customer requirement – no matter how specific it is.

  1. High reliability
  2. High availability
  3. Long service life, designed for 25 – 30 years
  4. Low operating costs
  5. Clearly structured operator display for easy operation and intuitive communication
  6. Latest communication software, complete system monitoring
  7. Integrated battery management
  8. High degree of flexibility, almost infinite configurations possible
Brochure, PDF

Welcome
at Statron

062 887 48 87
statron@statron.ch
Statron Group
24 – 220
Vdc
50 – 2’000
A
>100
Realized Installations

Polarizing Rectifier

The Statron polarizing rectifiers are used as standby units to protect the power supplies in systems of system-critical industrial or chemical processes. For this special application, the robust rectifier has a flexible interface for voltage and current specification and monitoring.

  1. High reliability
  2. High availability
  3. Long service life, designed for 25 – 30 years
  4. Low operating costs
  5. Clearly structured operator display for easy operation and intuitive communication
  6. Latest communication software, complete system monitoring
  7. Integrated battery management
  8. High degree of flexibility, almost infinite configurations possible

Welcome
at Statron

062 887 48 87
statron@statron.ch
Statron Group
24 – 220
Vdc
5 – 80
A
>500
Realized Installations

Single Phase Battery Charging System

The BDS is the single-phase variant of the proven three-phase BDTe series with industrial thyristor-controlled rectifiers. It is also designed for operation in industrial environments and for applications such as power plants, oil and gas production and processing, petrochemicals or power distribution and transmission. The flexible concept with a wide range of options can be optimally adapted to customer specifications.

  1. High reliability
  2. High availability
  3. Long service life, designed for 25 – 30 years
  4. Low operating costs
  5. Clearly structured operator display for easy operation and intuitive communication
  6. Latest communication software, complete system monitoring
  7. Integrated battery management
  8. High degree of flexibility, almost infinite configurations possible
Product data sheet, PDF

Welcome
at Statron

062 887 48 87
statron@statron.ch
Statron Group
24 – 220
Vdc
2.5 – 360
A
>250
Realized Installations

Compact Rectifier / Battery Charging System

Using proven switched-mode power supply technology, Statron’s BCSe rectifier series sets new standards in compact design, reliability, functionality, ease of maintenance and operation. The BCSe series is a primary switched mode high power rectifier designed for demanding environmental conditions in industrial applications such as power generation and distribution systems for worldwide use. The user-friendly system concept in combination with a number of options makes it possible to meet almost any customer requirement.

  1. High reliability
  2. High availability
  3. Compact design
  4. Long service life
  5. Low operating costs
  6. Power factor 0.99 at input
  7. Clearly structured operator display for easy operation and intuitive communication
  8. Battery circuit monitoring every 24 hours
  9. Trickle charge and heavy charge for lead-acid and nickel-cadmium batteries
Brochure, PDF

Welcome
at Statron

062 887 48 87
statron@statron.ch
Statron Group
110 – 415
Vac
5 – 650
kVA
>100
Realized Installations

Inverter System

The IDSe/IDTe inverter series is designed to operate in industrial environments and for applications such as power plants, oil and gas production and processing, petrochemicals or power distribution and transmission. The flexible concept with a wide range of options can be optimally adapted to customer specifications.

The IDSe/IDTe series is equipped with state-of-the-art µP digital technology and offers user-friendly operation, flexible integration into control systems and monitoring functions.

  1. High reliability
  2. High availability
  3. Long service life, designed for 25 – 30 years
  4. Low operating costs
  5. Clearly structured operator display for easy operation and intuitive communication
  6. Latest communication software, complete system monitoring
  7. Integrated battery management
  8. High degree of flexibility, almost infinite configurations possible
Brochure, PDF

Welcome
at Statron

062 887 48 87
statron@statron.ch
Statron Group
110 – 415
Vac
5 – 200
kVA
>500
Realized Installations

Industrial UPS System

The single- and three-phase S2100/2300 series with proven thyristor-controlled rectifiers is designed for operation in industrial environments and for applications such as power plants, oil and gas production and processing, petrochemicals or power distribution and transmission. The versatile concept with a wide range of options can be optimally adapted to customer specifications.

The S2100/2300 series is equipped with state-of-the-art µP digital technology and offers user-friendly operation, flexible integration into control systems and monitoring functions.

  1. High reliability
  2. High availability
  3. Long service life, designed for 25 – 30 years
  4. Low operating costs
  5. Clearly structured operator display for easy operation and intuitive communication
  6. Latest communication software, complete system monitoring
  7. Integrated battery management
  8. High degree of flexibility, almost infinite configurations possible
Produc data sheet, PDF

Welcome
at Statron

062 887 48 87
statron@statron.ch
Statron Group
110 – 445
Vdc
5 – 200
kVA
>500
Realized Installations

Industrial PFC / UPS Systems

Based on the A.T.I.S.® (Advanced Technology Industrial System) UPS architecture, the single and three-phase S3100 / S3300 industrial UPS is a system of the latest generation. It combines the reliability and robustness of an online double conversion UPS with the benefits of the latest “Power Factor Corrected” (PFC) IGBT rectifier technology.

This technology minimizes harmonic distortion at the input to the UPS, while significantly increasing system efficiency, thereby saving cost and energy. The S3000 is specifically designed for harsh industrial environments.

The design of the S3000 meets the highest industrial requirements and standards (VFI-SS-111 in compliance with IEC/EN62040-3).

  1. High reliability
  2. High availability
  3. Long service life, designed for 25 – 30 years
  4. Low operating costs
  5. Regenerative capability
  6. Clearly structured operator display for easy operation and intuitive communication
  7. Latest communication software, complete system monitoring
  8. Integrated battery management
  9. High degree of flexibility, almost infinite configurations possible
Brochure, PDF

Welcome
at Statron

062 887 48 87
statron@statron.ch
Statron Group
24 – 220
Vdc
10 – 1040
Adc
1 – 80
kVA

Modular Power Supply

The modular power supply (Statron Modular Technology – SMT) series is designed to operate in industrial environments and for applications such as power plants, oil and gas production and processing, petrochemicals or power distribution and transmission. The flexible concept with a wide range of options can be optimally adapted to customer specifications.

The SMT series is equipped with clocked high-frequency DC compact power supply modules and offers user-friendly operation, flexible integration into control systems and monitoring functions.

  1. High reliability
  2. High availability
  3. Long service life
  4. Very flexible configuration possible
  5. Low operating costs
  6. Clearly structured operator display for easy operation and intuitive communication
  7. Latest communication software, complete system monitoring
  8. Integrated battery management
  9. High degree of flexibility, almost infinite configurations possible
Brochure, PDF

Welcome
at Statron

062 887 48 87
statron@statron.ch
Statron Group
100 – 440
Voc
0.8 – 7350
kVA
>200
Realized Installations

Voltage Stabilizers

Depending on the quality of the network and / or the required tolerances, voltage stabilizers are required.

The electrically driven actuators of the regulating transformers keep the output voltage in the required tolerance band in AC applications. For this purpose, the devices can be used as a unit or in combination with a UPS / inverter solution.

DC voltage stabilizers are based either on electronic DC-DC converters or on switched counter cells with microprocessor control. This allows critical loads to be supplied with a stable voltage.

The advantages are:

  1. High reliability
  2. High availability
  3. Long service life
  4. Low operating costs
  5. High degree of flexibility, almost infinite configurations possible
Produktdatenblatt, PDF

Welcome
at Statron

062 887 48 87
statron@statron.ch
Statron Group
28 – 723
Aac
20 – 500
kVA
>50
Realized Installations

Semi-Industrial Modular UPS System

The next generation of scalable, modular 3-phase online double conversion UPS systems of the S6300e series guarantees highest flexibility and availability.

With the gradation in 20kVA and 50kVA modules, an adaptation to customer requirements is possible, up to a power of 60kVA batteries can be integrated in the UPS cabinet.

The decentralized parallel architecture of the modules allows easy adaptation to increasing power requirements. Each module has its own inverter, rectifier and controller, and a hot-swap function that eliminates the need to shut down the system for module replacement.

The central static switch allows the UPS system to be switched to a manual service bypass without interruption in case of service.

The central control unit with color touch screen can be used to query general information about the system up to the measured values and status messages of the individual modules. The S6300e combines maximum efficiency with minimum space requirements.

  1. High reliability
  2. High availability
  3. Long service life, designed for >15 years
  4. Low operating costs
  5. Hot swappable – module exchange during operation
  6. Central static switch – high short circuit performance
  7. Transformerless design
  8. Power factor 0.99 at input
  9. Modular expandable, N+1 redundancy
  10. cos φ = 1 (50kVA module); cos φ = 0.9 (20kVA module) at output
  11. Efficiency >96%
  12. Compact design
  13. High energy density
  14. Clearly structured operator display for easy operation and intuitive communication
  15. Latest communication software, complete system monitoring
  16. Remote monitoring via SNMP adapter, ModBus or floating contacts
  17. Battery management integrated
  18. Battery can be integrated (system 20-60kVA) or operation with external batteries
Brochure, PDF

Welcome
at Statron

062 887 48 87
statron@statron.ch
Statron Group